Holy Moly Plunger Support Assembly

(1 customer review)

$19800

 

The Plunger Support Assembly reduces the amount of leverage the tool head has by supporting the opposite side of the shoulder bolt. Using hardened A2, 2 bearings, and a spring-loaded rod directly in line with the tool head cam, we have replaced the stock bushing/shoulder bolt and turned the most finicky part of the Dillons into an absolute workhorse.

This product will work on the 1050, CP2000, and RL1100. *If on a 1050 with Mark 7, Ammobot, or Dillon Autodrive; There may be a clearance issue when using an aftermarket toolhead. This does not apply to the CP2000 and RL1100. 

This product is for the Plunger Support Assembly only and you will need to purchase the Lithium Case Feed Tube Adapter here.

If you are running the Lithium Pneumatic Decapping System, you can purchase the Actuator Mount Here.

Category: Tag: Product ID: 190

Description

The Plunger Support Assembly reduces the amount of leverage the tool head has by supporting the opposite side of the shoulder bolt. Using hardened A2, 2 bearings, and a spring-loaded rod directly in line with the tool head cam, we have replaced the stock bushing/shoulder bolt and turned the most finicky part of the Dillons into an absolute workhorse. 

This product is for the Plunger Support Assembly only and you will need to purchase the Lithium Case Feed Tube Adapter here.

If you are running the Lithium Pneumatic Decapping System, you can purchase the Actuator Mount Here.

1 review for Holy Moly Plunger Support Assembly

  1. Butch Wilcox –

    I bought 3 Holy Moly case supports for my presses and I must say they install the brass on the shell plate at any speed flawlessly. These are very well engineered and are wroth every penny.if you have an autodrive these are a must for flawless running.
    Butch’s Brass

Add a review

Your email address will not be published. Required fields are marked *

Related products